Controls +
- New
- In Design
- Designed
- In Fabrication
- Fabricated
- In Transit
- Delivered
Description: A 3D printed glider with huge wings. Hopefully, it flies.
Project views: 35
Project status: In Fabrication Now accepting: Fabrication Bids
Design Type-Tier: simple-bronze
Design Price: US$995.00 | Payment Pending
Fabrication Price: Payment Pending
Order Number: 20200530194432-1669-01-0
Material desired: MJF with Nylon (or other lightest material) if possible! (Some surfaces are very thin)
Quantity desired: 1
Design File Parameters:
x dimension [mm]: 66.77
y dimension [mm]: 176.97
z dimension [mm]: 171.11
y dimension [mm]: 176.97
z dimension [mm]: 171.11
area [mm^2]: 19903.18
volume [mm^3]: 27793.50
total vol (qty: 1)[mm^3]: 27793.50
volume [mm^3]: 27793.50
total vol (qty: 1)[mm^3]: 27793.50
Additional Information: Wings are huge, so they are split up into two parts. (Wingspan is about 14 inches long but it is split into two 7 inch parts so it should be fine) Body and stabilizers should be one part. Wings and stabilizers are pretty thin. (2 mm thickness) Wings are designed so they can just be glued together and then glued on top of the glider.
Google Drive link to all the STL files:
https://drive.google.com/drive/folders/1VUGB_gp88V0qXcsXIjNUWVXNKmsZV4J4?usp=sharing
NEW GOOGLE DRIVE LINK FOR MJF PRINT UPDATED 6/02/2020
https://drive.google.com/open?id=1Exz9AHiuoptpUNMkUHrXk1aOei7UstT2
Updated 1703d ago on:
30 May 2020 at 19:44:32
Share this project to:
Comments
You must sign in or sign up to post a comment.